Formatting is the part of self-publishing that feels technical, and it’s fine to find it fiddly. The good news is that KDP’s rules are published and specific, so you can set up your file once and get it right.
This guide covers paperback only (KDP also does hardcovers, with different rules). It follows KDP’s own help pages as of November 2026. If you’re still mapping the whole process, start with our step-by-step self-publishing guide.
Step 1: pick a trim size
Trim size is the finished page size after printing and cutting. Choose it before you format, because changing it later reflows your whole book and changes your cover.
On Amazon.com, KDP lists these paperback trim sizes (width by height, in inches):
- Regular: 5 x 8, 5.06 x 7.81, 5.25 x 8, 5.5 x 8.5, 6 x 9
- Large: 6.14 x 9.21, 6.69 x 9.61, 7 x 10, 7.44 x 9.69, 7.5 x 9.25, 8 x 10, 8.25 x 6, 8.25 x 8.25, 8.5 x 8.5, 8.5 x 11, 8.27 x 11.69
For novels and most nonfiction, the usual picks are 5 x 8, 5.5 x 8.5 and 6 x 9. Illustrated and picture books tend to use the square or larger sizes. Look at a few printed books in your genre and measure them.
Step 2: check page count limits
KDP’s minimum is 24 pages. Maximums depend on ink and paper. For most trim sizes:
- Black ink, white paper: 24 to 828 pages
- Black ink, cream paper: 24 to 776 pages
- Standard color, white paper: 72 to 600 pages
- Premium color, white paper: 24 to 828 pages
A few sizes have lower maximums (for example, 8.5 x 8.5 and 8.5 x 11 top out at 590 for black ink on white paper), so check the table for your size.
Cream paper is the usual choice for fiction. White paper suits books with images or diagrams. Both are your call.
Step 3: set your margins
The inside margin (the gutter, next to the binding) must grow as your book gets thicker. KDP’s minimums:
| Page count | Inside (gutter) |
|---|---|
| 24 to 150 | 0.375 in |
| 151 to 300 | 0.5 in |
| 301 to 500 | 0.625 in |
| 501 to 700 | 0.75 in |
| 701 to 828 | 0.875 in |
Outside, top and bottom margins must be at least 0.25 in if your pages have no bleed. If they do have bleed, KDP asks for at least 0.375 in on the top, bottom and outside.
These are minimums, not good-looking defaults. Many interior designers go wider so text doesn’t crowd the edge. Also use your final page count including front and back matter: a book that’s 295 pages of text can tip into the next gutter band once you add an author bio.
Step 4: decide whether you need bleed
Bleed means artwork or color that runs to the very edge of the page. If your interior is plain text on white or cream, you don’t need it. If even one page has bleed, KDP says to set up the whole file with bleed.
- Bleed is 0.125 in (3.2 mm) on the top, bottom and outside edges.
- Page width becomes trim width plus 0.125 in. Page height becomes trim height plus 0.25 in.
- Example: a 6 x 9 book becomes 6.125 x 9.25 in.
- A manuscript with bleed must be uploaded as a PDF.
Step 5: export the right file
Without bleed, KDP accepts PDF, DOC, DOCX, RTF, HTML and TXT, and converts to PDF for printing. A PDF is still the safest choice, because what you export is exactly what gets printed. Word files can reflow when KDP converts them.
- Fonts: embed all of them, and keep to KDP’s 7 pt minimum font size. KDP also asks you to embed images.
- Images: at least 300 DPI. KDP recommends staying under 600 DPI to keep the file below 650 MB.
- Flatten transparent objects and layers.
- Remove crop marks, trim marks, bookmarks, comments and metadata.
Step 6: build the cover to the right size
The paperback cover is one PDF containing back cover, spine and front cover as a single image, with 0.125 in bleed on the top, bottom and outside edges. Total width is bleed plus back cover plus spine plus front cover plus bleed. Spine width depends on page count and paper: for black ink on white paper, it’s page count x 0.002252 in; on cream, page count x 0.0025 in. Color ink uses different values, so use the calculator.
Don’t do this math by hand. Enter your trim size, ink, paper and page count into KDP’s cover calculator and it produces a template. Spine text needs at least 79 pages, and KDP rejects spine text on shorter books (its Cover Creator needs 80). Keep covers at 300 DPI minimum and flattened. Our ISBN guide covers the barcode, which KDP will add for you if you leave a space.
If your cover PDF keeps getting rejected for size or layers, our free Cover PDF Fixer may help with common problems. It’s a helper, not a replacement for the calculator, so still check the result against your template.
Common reasons KDP rejects a file
From KDP’s own list of common errors:
- Fonts or images not embedded, or unflattened transparency
- Locked or encrypted PDFs
- Emoji or special characters in the file name
- Crop marks, bookmarks, comments or metadata left in
- Missing or extra blank pages, or wrong pagination
- Title missing from the front cover
- PDF-creator logos or watermarks
Preview before you order a proof
After you upload, KDP’s Print Previewer shows how your book will look when printed and flags any issues it finds. For a draft book, you need to approve it in Print Previewer before you can order proof copies. Proofs are printed copies with a “Not for Resale” watermark, and you can order up to 5 at a time. Shipping is paid and not free or Prime.
The honest part: a proof costs money and takes days to arrive, but it shows things a screen won’t, like text too close to the gutter or a cover that looks darker in print. For a first book, we think it’s worth the wait.
Pre-upload checklist
- Confirm your trim size and paper (white or cream) are final.
- Check your final page count, including front and back matter, against the gutter table.
- Confirm margins meet KDP’s minimums, with or without bleed.
- Embed fonts and flatten transparency. Remove crop marks and comments.
- Check images are at least 300 DPI.
- Export a PDF and scroll every page for blank or misplaced pages.
- Generate your cover template from the cover calculator using the final page count.
- Upload, review in Print Previewer, fix every flagged issue, then order a proof.
Formatting is one cost line among several, so see what self-publishing costs for the full picture. Our free 30-Day Author Checklist helps you plan the rest, and if you want a longer walkthrough, The BookPros Author Blueprint (104 pages, $19) is an optional next step. If you’re weighing platforms, see KDP vs IngramSpark.
Sources
- KDP Help: Set trim size, bleed and margins
- KDP Help: Paperback submission guidelines
- KDP Help: Paperback cover submission guidelines
- KDP Help: Proof and author copies
- KDP cover calculator
Checked November 2026. Policies and prices change, so confirm on the platform before you act.

